Products

  • Compact, Silent and Reliable AC geared motors from 6 Watts to 200 Watts

  • Low noise – achieved through accurately machined Helical Gears immersed in a grease bath.

  • Compact square frame sizes from 60mm to 104mm.

  • Available as Single phase & Three phase induction motors

  • Can be fitted with gear heads of ratio from 3:1 to 2000:1.

  • Maximum permissible output torque is 400kg-cm.

Spindle Axis ELGA-BS

.

  • Speeds of up to 2 m/s

  • Acceleration of up to 20 m/s2

  •  Repetition accuracy of up to ±0.003 mm

  • Strokes of up to 3000 mm

  • Available from 0.25HP upto 500HP.

  • Both single phase I/P and 3 phase I/P models are available.

  •  RS485 MODBUS RTU communication facility in all the series

  •  Intelligent sensor less vector control with high starting torque of 200% @ 0.3HZ.

  •  A ST FB encoder feedback card allows us to achieve accurate positioning for Motion Control.

  •  Position control function with feedback signal to perform motion control signal

Toothed belt Axis ELGA-TB

.

  • Speeds of up to 10 m/s

  • Acceleration of up to 50 m/s2

  •  Repetition accuracy of up to ±0.08 mm

  • Strokes of up to 8500 mm (longer strokes on request)
  • Flexible motor mounting

 

  • Fractional Horse Power (FHP) 12V / 24V DC Geared Motors.

  • Geared motors with factory fitted worm or spur gear

  •  Boxes that are maintenance free and lubricated for life.

  • High stall torque / High rated torque in a compact frame size.

  • Continuous duty and intermittent duty cycle motors.

  •  DC Geared motors fitted with built in hall sensors for stall detection and anti pinch operations.

  • Very low noise and rugged.

Mini slide EGSC-BS

  • Four highly compact sizes for precision positioning up to 600mm/s at a max. length of 200mm

  • Spindle with long-life, low wearing interior ball screw

  •  Recirculating ball bearing guide for yoke slide with high load-bearing capacity 

  • 2 Phase Hybrid Stepper Motors, 200 steps/ turn , 1.8 Degree/step

  • Available from 0.24NM to 19.0 NM Holding Torque.

  •  Available Frame sizes from NEMA 17 to NEMA 40

  •   Double end shaft available as an option.

  •  Gearboxes and Encoders are options.

  •  Stepping motors complying with UL & EN standards are available upon request.

 

Electric Cylinder EPCO

  • With recirculating ball spindle

  • Optionally with a female thread

  • Optionally with holding a brake

  •  Degree of protection IP40

  • Compact dimensions  

  • Extensive mounting accessories for various installation situations

  • 2 Phase Hybrid Stepper Motors, 200 steps/ turn , 1.8 Degree/step

  • Available from 0.24NM to 19.0 NM Holding Torque.

  • Available Frame sizes from NEMA 17 to NEMA 40

  • Double end shaft available as an option.

  • Gearboxes and Encoders are options.

  • Stepping motors complying with UL & EN standards are available upon request.

Electric rotary drive ERMO

  •  Electric rotary drive with a stepper
    motor and integrated gear unit

  • ServoLite – closed-loop operation
    with encoder

  • Heavy-duty bearing for high forces
    and torques

  • Backlash-free prestressed rotating
    plate with very good axial eccentricity and concentricity properties

  • Optional holding brake

  • Optionally with pneumatic or
    electric energy through feed

  • Quick and accurate installation

  • Built in Controller

  • Available 30W-205W,Torque 0.9 to 120 Nm
  • 24 V Power Supply, Speed Control-0 – 10V

  • High Efficiency and Starting Torque

 

  • Capacity : 50W to 15kW (22kW is made to Order)

  • Motor type : Low inertia, Middle inertia, High inertia 

Ultra Compact and Exclusively designed for pulse train position command E and LIQI series.
Position, Speed, Torque and full-closed control, 17,20,23 Bits Incremental/Absolute Encoders.
Easy-to-use servo gain-tuning with "Real-time auto tuning", Less vibration with "Vibration suppression filter", Position command pulse 4 Mpps Global standard (CE/UL) rated, IP65 rated & IP67 rated.

  • Capacity : 50W to 15kW (22kW is made to Order)

  • Motor type : Low inertia, Middle inertia, High inertia.

Ultra Compact and Exclusively designed for pulse train position command E and LIQI series
Position, Speed, Torque and full-closed control, 17,20,23 Bits Incremental/Absolute Encoders.
Easy-to-use servo gain-tuning with "Real-time auto tuning“, Less vibration with "Vibration suppression filter“, Position command pulse 4Mpps
Global standard (CE/UL) rated, IP65 rated & IP67 rated.

  • Different type of Sensors with various Sensing Range available, like Proximity Sensors, Area Sensors, Light Curtain, Pressure Sensors, Flow Sensors, Mark Sensors, Laser Sensors Etc 
  • High-speed response, excellent workability
  • Ease of maintenance

Integrated communication interface for USS and MODBUS RTU, additional modules are not required.
Setpoints can also be specified via the analog input
Integrated communication macros
The automation system can be conveniently set up via the standardized libraries in the PLC
Simply plug in, no special tool required
The terminal designations are engraved
2 analog inputs
1 analog output
4 digital inputs
2 digital outputs
Optimized application settings for quick commissioning and maximum performance.
Wider voltage range, -10C to 60C ambient temperature range for all power , better cooling design and coated PCB increase robustness of the drive in quality.

  • High speed of operation of 0.32µs/step execution time.

  • 32K of memory capacity. Some models have upto 120K.

  • Small PLCs can handle upto 384 I/Os while larger PLCs go upto 2048 I/Os.

  • RS232/485, USB, Ethernet communication available as option UL/CE rated.

  • Programming is as per IEC 61131-3 standards and supports open PLC platform.

  • Upto 8 levels of password protection.

  • High speed of operation of 0.32µs/step execution time.

  • 32K of memory capacity. Some models have upto 120K. 
  • Small PLCs can handle upto 384 I/Os while larger PLCs go upto 2048 I/Os.

  • RS232/485, USB, Ethernet communication available as option UL/CE rated.

  • Programming is as per IEC 61131-3 standards and supports open PLC platform.

  • upto 8 levels of password protection.

 

  • Monochrome STN and 4096 colour TFT Touchscreens.

  • 320 x 240 dots, 32 characters x 24 lines max.

  • USB programming port.

  • SD card slot.

  • Recipe function, graph functions, flowing display functions.

  • Drivers available for Panasonic, Siemens, Omron Allen Bradley, Mitsubishi, LG and MODBUS RTU protocol.

  • Available in 3.8'' and 5.7'' screen sizes in the GT series.

  • TFT display, 65K colors.

  • ARM-based CPU.
  • A USB slave integrated to speed up HMI program downloading.

  • Three COM ports Integrated, communicating with 3 different protocols of controller at the same time.

  • 5.7"-21.9" touch screen

  • Remote access to data & email

  • IP65, NEMA 4 Compliant

  • sms alarm notification, email

  • Remote access to alarms

  • Alarms, shift wise reports

  • 1 to 6 axes control CF and USB interface

  • MPG on panel RS232/RS422 & ethernet communication

  • 8.4"/10.4" screen size Default 20/16 I/O expandable upto 128/128 I/O

  • Up to 8-axis control –PCI card

  • Stand alone Command execution–40 µs
  • Linear & circular interpolation

  • Electronic Gearing

  • Electronic Cam inbuilt

  • Stepper / Servo drive –up to 500W

  • 22MHz encoder in & 6 MHz pulse out

  • VRSF/VRL/VRS/EVL Series

  • Quiet operation

  • Easy mounting

  • Various ratio from 1/3 to 1/100

  • Torques upto2400 nm

  • Backlash of 3 , 5 and 15 arcminute